1c6d3d0cbc
* adding keymaps for krado industries * Modified default keymap.c files to be the same as via. * Changing vendor ID for Krado Industries * Suggested changes made Making changes suggested by zvecr. Removed dynamic_layer indicator, updated copyright year, deleted unused layers in keymaps. Co-authored-by: Joel Challis <git@zvecr.com> * rgbpin for ws2812 changed in info.json * Added encoder mapping rule file for default keymaps; added Fn layer shortcuts to Promenade layouts * Added rules.mk with encoder mapping for encoder boards at keymaps level. * Deleted extra key in LAYOUT * Update keyboards/kradoindustries/kousa/rules.mk Move WS2812 Driver from rules.mk to info.json Co-authored-by: jack <jack@pngu.org> * Update keyboards/kradoindustries/kousa/info.json Move WS2812 Driver from rules.mk to info.json Co-authored-by: jack <jack@pngu.org> * Update keyboards/kradoindustries/kousa/keymaps/default/keymap.c Move WS2812 Driver from rules.mk to info.json Co-authored-by: jack <jack@pngu.org> * Reverting settings.json * Encoder map code change [2]>[NUM_DIRECTIONS] * Adding Promenade RP24S Adding Promenade RP24S keyboard.json, default keymap, and readme * Adding layer access to Promenade RP24S Adding layer access to layers 1 and 2 --------- Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: jack <jack@pngu.org>
29 lines
No EOL
2.1 KiB
Markdown
29 lines
No EOL
2.1 KiB
Markdown
# Promenade RP24S
|
|
|
|
|
|
|
|
The Promenade RP24S is the solder version of the [Promenade](https://github.com/qmk/qmk_firmware/tree/master/keyboards/kradoindustries/promenade) pcb which is based on the [Boardwalk](https://github.com/qmk/qmk_firmware/tree/master/keyboards/boardwalk), a 60% ortholinear keyboard that uses 1.5u Ergodoxian modifier keys. The original Boardwalk's split hand and 65% layouts are supported, and a new 50% extended layout similar to [RGBKB's Pan](https://github.com/qmk/qmk_firmware/tree/master/keyboards/rgbkb/pan) with two right-side macro columns was also added. In addition to Pok3r-style 60% tray mounting points, the pcb also has edge cuts for use in gummy o-ring mount boards like the Bakeneko60. Some additional spacebar options including 3u, 6u, and triple 2u were added. The pcb has two footprint locations for a JST connector, many breakout pins, and 19 rotary encoder locations. The MCU has been upgraded to a RP2040 with 32M-bit of flash memory.
|
|
|
|
|
|
* Keyboard Maintainer: [Feags](https://github.com/Feags) / [Krado Industries](https://kradoindustries.com/)
|
|
* Hardware Supported: Promenade pcb. Many 60% cases.
|
|
* Hardware Availability: [Krado Industries](https://kradoindustries.com/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make kradoindustries/promenade_rp24s:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make kradoindustries/promenade_rp24s:default:flash
|
|
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |