39 lines
1.5 KiB
Markdown
39 lines
1.5 KiB
Markdown
# Harite v2 (Thumbstick + PMW3389 version)
|
|
|
|
5 way switch directional keyboard
|
|
|
|
|
|
|
|
* Keyboard Maintainer: [Dane Lipscombe](https://github.com/dlip)
|
|
* Hardware Supported: Harite v2 (Thumbstick + PMW3389 version)
|
|
* Hardware Availability: <https://github.com/dlip/harite-v2>
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
```bash
|
|
make dlip/haritev2/thumbstick_pmw3389:default
|
|
```
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
```bash
|
|
# For the left half...
|
|
make dlip/haritev2/thumbstick_pmw3389:default:uf2-split-left
|
|
# or the qmk cli equivalent:
|
|
qmk flash -kb dlip/haritev2/thumbstick_pmw3389 --keymap default -bl uf2-split-left
|
|
|
|
# For the right half...
|
|
make dlip/haritev2/thumbstick_pmw3389:default:uf2-split-right
|
|
# or the qmk cli equivalent:
|
|
qmk flash -kb dlip/haritev2/thumbstick_pmw3389 --keymap default -bl uf2-split-right
|
|
```
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|