0fde9c9cac
* Add support for Coffee Break Keyboards Acai * Apply suggestions from code review Co-authored-by: Jack Sangdahl <jack@pngu.org> * Ran qmk format-json * Misssed one of @waffle87's suggestions * Misssed another of @waffle87's suggestions * Try hosting on imgur.com * Remove empty layers, add boot to layer 2 * Enhance the default keymap * Use correct keycodes for RGB --------- Co-authored-by: Jack Sangdahl <jack@pngu.org>
26 lines
No EOL
1.1 KiB
Markdown
26 lines
No EOL
1.1 KiB
Markdown
# Acai
|
|
|
|
|
|
|
|
A 10x4 ortholinear keyboard made and sold by Coffee Break Keyboards. PCB designed by Snipeye. Case designed by Rain and Obabo. [More info on cbkbd.com](https://www.cbkbd.com/product/acai)
|
|
|
|
* Hardware Supported: Acai PCB
|
|
* Hardware Availability: [cbkbd.com](https://www.cbkbd.com/product/acai-pcb)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make cbkbd/acai:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make cbkbd/acai:default:flash
|
|
|
|
See the [build environment setup](getting_started_build_tools) and the [make instructions](getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |