41 lines
1.5 KiB
Markdown
41 lines
1.5 KiB
Markdown
# SteelSeries Prime
|
|
|
|
|
|
|
|
Erase with an stlink and flash this [uf2boot bootloader](https://github.com/daskygit/uf2-prime-plus), this is a a one way procedure voiding any warranty so be sure you don't want to use the original manufacturers firmware.
|
|
|
|
you may need to remove write protection to flash, e.g. with openocd in linux
|
|
|
|
```sh
|
|
openocd -f interface/stlink.cfg -f target/stm32f1x.cfg -c "init; reset halt; stm32f1x unlock 0; flash protect 0 0 last off; reset halt; exit"
|
|
|
|
```
|
|
|
|
and write the new bootloader
|
|
|
|
```sh
|
|
|
|
openocd -f interface/stlink.cfg -f target/stm32f1x.cfg -c "program build/PRIME_PLUS/uf2boot.bin verify reset exit 0x8000000"
|
|
|
|
```
|
|
|
|
* Keyboard Maintainer: [Dasky](https://github.com/daskygit)
|
|
* Hardware Supported: SteelSeries Prime
|
|
* Hardware Availability: https://steelseries.com/gaming-mice/prime
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make steelseries/prime:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make steelseries/prime:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 2 ways:
|
|
|
|
* **Bootmagic reset**: Hold down left mouse button and plug in.
|
|
* **Bootloader entry**: Hold the underneath button while plugging in.
|