e5f47fa269
Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
# fave10xs
|
|
|
|
|
|
|
|
Dolphin max PCB solder version Fave10xs
|
|
|
|
* Keyboard Maintainer: [Freather](https://github.com/Freather)
|
|
* Hardware Supported: STM32F072 Linworks Fave10xs PCB
|
|
* Hardware Availability: small gb ran in Asia
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make linworks/fave10xs:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make linworks/fave10xs:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Hold the button on the back of the PCB then plug in the PCB with USB cable
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|