8d29bd07c2
* Refactor bastardkb/scylla
- Update keyboard aliases accordingly
- Migrate keymap to JSON and better represent physical layout
- scylla/blackpill
- Migrate common configuration to keyboard level
- Remove unnecessary or user-specific configuration
- Migrate some configuration to data-driven
- Use short SPDX license headers
- Remove unnecessary rules.mk file
- Formatting pass on keyboard.json
- scylla/v1
- Remove likely unneeded version, per qmk#23814
- scylla/v2
- Remove splinky_2 revision, per qmk#23814
- Remove splinky_3, stemcell revisions; converter feature should
be used here
- Rename scylla/v2/elitec -> scylla/promicro, as a converter can
be used for any pin-compatible microcontrollers
* Small keymap fix
27 lines
1.3 KiB
Markdown
27 lines
1.3 KiB
Markdown
# Scylla
|
|
|
|
* Keyboard Maintainer: [Quentin Lebastard](https://github.com/bastardkb)
|
|
* Hardware Supported: BastardKB Blackpill or Pro Micro adapter & compatible development boards
|
|
* Hardware Availability: [GitHub](https://github.com/Bastardkb/Scylla)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make bastardkb/scylla/blackpill:default
|
|
make bastardkb/scylla/promicro:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make bastardkb/scylla/blackpill:default:flash
|
|
make bastardkb/scylla/promicro:default:flash
|
|
|
|
Note if using the `promicro` version: If you are using an Elite-C compatible development board, see [here](../readme.md#handedness-pin-on-elite-c-holder) for setting handedness by pin.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the adapter PCB
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|