a3ecbc53f6
* Refactor bastardkb/charybdis/4x6 - Update keyboard aliases accordingly - Migrate various configuration to data-driven - Use short SPDX license headers - Remove configuration that trends towards user-specific (CRC Table) - Migrate common configuration upwards - Migrate keymap to JSON - Remove likely unneeded v1 revision per #23811 - Remove revisions splinky_2, splinky_3, and stemcell where a converter should be used - Rename v2/elitec -> elitec. Specifically named elitec, as this board requires pin compatibility with an Elite-C (bottom 5 pins) * Add aliases * Replace unecessarily removed split hand pin configuration * Revert "Replace unecessarily removed split hand pin configuration" This reverts commit 0b98d1bc140a4b18c16d2b524cc8731f016372b1. After second thought, it is not necessary to configure this by default, as any user who wishes to set handedness by pin and is using an Elite-C pin compatible development board will need to manually set the pin anyway, which likely means referencing the readme.md file, which also contains the necessary SPLIT_HAND_PIN_LOW_IS_LEFT configuration.
25 lines
737 B
C
25 lines
737 B
C
// Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
|
|
// Copyright 2021 Stefan Kerkmann (@KarlK90)
|
|
// Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
#pragma once
|
|
|
|
#define WS2812_PWM_DRIVER PWMD2
|
|
#define WS2812_PWM_CHANNEL 2
|
|
#define WS2812_PWM_PAL_MODE 1
|
|
#define WS2812_EXTERNAL_PULLUP
|
|
#define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM1
|
|
#define WS2812_PWM_DMA_CHANNEL 3
|
|
|
|
#define SPI_DRIVER SPID1
|
|
#define SPI_SCK_PIN A5
|
|
#define SPI_SCK_PAL_MODE 5
|
|
#define SPI_MOSI_PIN A7
|
|
#define SPI_MOSI_PAL_MODE 5
|
|
#define SPI_MISO_PIN A6
|
|
#define SPI_MISO_PAL_MODE 5
|
|
|
|
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
|
|
|
|
#define POINTING_DEVICE_CS_PIN B14
|
|
#define PMW33XX_CS_DIVISOR 64
|