* Refactor bastardkb/charybdis/4x6
- Update keyboard aliases accordingly
- Migrate various configuration to data-driven
- Use short SPDX license headers
- Remove configuration that trends towards user-specific (CRC Table)
- Migrate common configuration upwards
- Migrate keymap to JSON
- Remove likely unneeded v1 revision per #23811
- Remove revisions splinky_2, splinky_3, and stemcell where a converter
should be used
- Rename v2/elitec -> elitec. Specifically named elitec, as this board
requires pin compatibility with an Elite-C (bottom 5 pins)
* Add aliases
* Replace unecessarily removed split hand pin configuration
* Revert "Replace unecessarily removed split hand pin configuration"
This reverts commit 0b98d1bc140a4b18c16d2b524cc8731f016372b1.
After second thought, it is not necessary to configure this by default,
as any user who wishes to set handedness by pin and is using an Elite-C
pin compatible development board will need to manually set the pin
anyway, which likely means referencing the readme.md file, which also
contains the necessary SPLIT_HAND_PIN_LOW_IS_LEFT configuration.
* Clean up `DEBOUNCE` in config.h, 0-9
* Clean up `DEBOUNCE` in config.h, A
* Clean up `DEBOUNCE` in config.h, B
* Clean up `DEBOUNCE` in config.h, C
* Clean up `DEBOUNCE` in config.h, D
* Clean up `DEBOUNCE` in config.h, E
* Clean up `DEBOUNCE` in config.h, F
* Clean up `DEBOUNCE` in config.h, G
* Clean up `DEBOUNCE` in config.h, H
* Clean up `DEBOUNCE` in config.h, handwired
* Clean up `DEBOUNCE` in config.h, I
* Clean up `DEBOUNCE` in config.h, J
* Clean up `DEBOUNCE` in config.h, K
* Clean up `DEBOUNCE` in config.h, L
* Clean up `DEBOUNCE` in config.h, M
* Clean up `DEBOUNCE` in config.h, N
* Clean up `DEBOUNCE` in config.h, O
* Clean up `DEBOUNCE` in config.h, P
* Clean up `DEBOUNCE` in config.h, Q
* Clean up `DEBOUNCE` in config.h, R
* Clean up `DEBOUNCE` in config.h, S
* Clean up `DEBOUNCE` in config.h, T
* Clean up `DEBOUNCE` in config.h, U
* Clean up `DEBOUNCE` in config.h, V
* Clean up `DEBOUNCE` in config.h, W
* Clean up `DEBOUNCE` in config.h, X
* Clean up `DEBOUNCE` in config.h, Y
* Clean up `DEBOUNCE` in config.h, Z
* Remove default debounce from info.json
* Migrate non-default debounce to info.json
* Fix up bastardkb boards since blackpill support is officially added.
* Check for blackpill version, not elite c.
* Add checks in chibiOS config since multiple ARM controllers supported.
* Rework rules.mk for keymaps to better handle arm vs avr support
* Start moving away from `matrix_*_*` functions.
* `housekeeping_task_*` instead of `matrix_scan_*`
* `keyboard_(pre|post)_init_*` instead of `matrix_init_*`
* Add ℂℴmⅈℂ unicode input method.
* Clean up unicode code to be more compact and flexible.
* Remove/move Pro Micro LED commands to userspace and better filter them
* Fixup OLED code
* Use newer quantum keycode functions/preprocessors rather than manual bit manipulation
* Make unicode mode render much more compact/simple.
* Make qmk secrets more self contained
* Remove custom implementation of split watchdog
* bastardkb: cleanup blackpill configuration
Fixes#17
* bastardkb: fix splinky configuration
The pinout of the splinky changed between the last beta batch, and the
production one. This commit updates the keyboard definition to support
the new pinout by default, while offering backward compatibility.
Define `SPLINKY_BETA_PINOUT` to build the firmware with pre-production
pinout.
Fixes#15
* bastardkb: add support for STeMCell
* Update scylla/tbkmini/skeletyl outdated readmes
* bastardkb/dilemma: enable circular scroll
* bastardkb/dilemma: add initial version of the `via` keymap
* bastardkb/dilemma/assembled: add new keyboard
Fixes#20
* bastardkb/dilemma: remove elite-c
* Initial support for the Dilemma 3x5+3 Assembled RGB
* Address code review comments
* Address more comments
* Address review comments
* Address more nits
* bastardkb: split splinky-based keyboards to distinguish between Splinky v2 and v3 pinout
